SERVICE
LETTERS (Click
Each Title For Link)
|
DATE |
MODEL |
|
#1-Finger Strainers |
|
Early M1 (Prior to Letter) |
|
#2-Fuel Tank Installation |
|
Early M1 (Prior to Letter) |
|
#3-Spark Plugs and Shields |
|
Early M1 (Prior to Letter) |
|
#4-Spinner |
|
Early M1 (Prior to Letter) |
|
#5-FAB-11 & FAB-13
Bushings, Elevator Control Tube |
|
M1 SN: 56-112 |
|
#6-Rotax 532LC Rubber
Intake Flanges |
11/7/1986 |
Specific SN Rotax Engines |
|
#7-Wing Tank Fuel Caps |
5/6/1987 |
M1 (Prior to Letter) |
|
#8-Lift Strut Modification |
5/6/1987 |
M1 SN: 2-116 |
|
#9-Plastic Spinners |
6/9/1987 |
M1 with 3 Blade Prop and Plastic Spinner |
|
#10-Wing Tank "T" Fittings |
8/14/1987 |
M1 (Prior to Letter) |
|
#11-Wing Tank Recall |
8/20/1987 |
M1 (Prior to March 23, 1987) |
|
#12-1/4" Propeller Bolts |
6/30/1988 |
M1, M2 (Prior to Letter) |
|
#13-Not Used |
NA |
NA |
|
#14-E-33 Aluminum Rear
Spinner Bulkheads |
12/27/1988 |
M1, M2 SN: 2-263, 278-281 |
|
#15-Wing Tanks, WT-1R and
WT-1L and Header |
3/27/1989 |
M1, M2 SN: 2-270 |
|
#16-Eletric Starter |
6/7/1990 |
Specific Rotax 503, 532 & 582 Engines
(Prior to Letter) |
|
#17-Not Used |
NA |
NA |
|
#18-Preflight Inspection
of Rudder Cables |
7/22/1991 |
M1, M2, M3 |
|
#19-Oil Injection System |
9/3/1991 |
All Models with Rotax 582 Engines (Prior
to letter) |
|
#19A-Oil Injection Systems
(Revised) |
5/9/1994 |
All Rotax 2-Stroke Engines |
|
#20-Shock Cords |
9/19/1991 |
M3, M4 (Prior to Letter) |
|
#21-Cotton Pox
Micro-Balloons |
10/16/1991 |
M3, M4 SN: 1143-1420 |
|
#22-Header Tank and Fuel
Line Routing |
10/22/1992 |
All Models using a Header Tank |
|
#23-Dual Brake Braking
Problems |
12/7/1992 |
All Models Equipped with Dual Brake Option |
|
#24-Propellar
Installation, Torquing Procedures and Maintenance |
12/14/1992 |
All Models |
|
#25-Lift Strut Attachment |
3/12/1993 |
All Models |
#25A-Lift Strut Attachment
(REVISED)
- Wing Dihedral
- Lift Strut
Adjustment
|
9/12/1994 |
- All non S5 Kitfox's
- All Models
|
#25B-Lift Strut Attachment
(REVISED)
- Wing Dihedral
- Lift Strut
Adjustment
|
9/12/1994 |
- All non S5 Kitfox's
- All Models
|
|
#26-Nose Gear Piston |
2/10/1994 |
S5 Vixen SN: ECV001-LCV023 |
|
#27-Airspeed Indicators
and Pitot Static System |
5/1/1994 |
All Kitfox™ Owners |
|
#27A-Airspeed Indicators
and Pitot Static System (REVISED) |
9/7/1994 |
All Kitfox™ Owners |
|
#28-Sound Absorbing Kit |
5/1/1994 |
All Kitfox's using Rotax 912 with optional
pre-sewn sound insulation material installed on the firewall |
|
#29-Vixen Documentation
and Upgrade |
4/6/1994 |
All S5 Vixen Owners |
|
#30-Aft CG Limit |
5/1/1994 |
All M4-1200 Models |
|
#30A-Aft CG Limit
(REVISED) |
9/7/1994 |
M1, M2, M3, M4, C4 |
|
#31-Tail Skid Bushing |
8/15/1994 |
All S5 Vixen 1200# Models |
|
#32-Elevator Push-Pull
Tubes |
6/23/1994 |
All S5 Models |
|
#33-Fuel Valve Mounting
Bushing |
6/24/1994 |
All S5 Vixen 1200# Models |
|
#34-Series 5 Horizontal
Bushing |
8/19/1994 |
All S5 Models |
|
#35-Rotax 582 Choke
Control |
8/19/1994 |
M1, M2, M3, M4, C4 |
|
#36-Cable Guides |
8/22/1994 |
All S5 Models |
|
#37-Series 5 Wing Folding |
8/22/1994 |
All S5 Models |
|
#38-Elevator Control Stop
Bushing |
9/12/1994 |
All S5 Models |
|
#39-Belly Stringer Forward
Attach Angle |
9/14/1994 |
All S5 Models |
|
#40-Bridge Rectifier |
11/19/1994 |
All Models |
|
#41-Charging System |
10/19/1994 |
All Models |
|
#42-Center Firewall
Section |
11/9/1994 |
All S5 Engine Kits prior to 11/31/94 |
|
#43-Series 5 Speedster
Rudder |
11/28/1994 |
All S5 Speedsters |
|
#44-Series 5 Connect Tube
Threads |
11/29/1994 |
All S5 Fuselage Kits prior to 11/31/94 |
|
#45-Ensuring Proper Fuel
System Performance |
9/21/1995 |
All Models with Wing Tanks |
|
#46-Possible Fatigue of
Vixen Nose Gear Fork |
9/1/1995 |
All S5 Vixens |
|
#47-Rudder Pedal Torgue
Tube Cracking |
8/22/1995 |
M1, M2, M3, M4, C4 |
|
#48-Welded Landing Gear |
8/22/1995 |
All Taildraggers Aircraft with Welded
Landing Gear |
|
#49-Rotax Service
Bulletins |
8/25/1995 |
All Models Powered by Rotax Engines |
|
#50-Matco M62 Wheel
Installation |
8/28/1995 |
Models with Matco W62 Wheels |
|
#51-Series 5 Round Cowl,
Rotax 912 Exhaust System |
9/11/1995 |
S5 Models using Round Cowls and Rotax 912
Engines |
|
#52-Pulsar II and III
Aircraft |
11/23/1998 |
Pulsar II & III Models |
|
#53-Rotax 912 and 912S
Engine Installations (Pulsar) |
4/22/1998 |
Pulsar II & III Models |
|
#54-Field Service Report
Request |
6/6/1999 |
S5 Models |
|
#55-Weight and Balance |
8/6/1999 |
S5 Vixen & Voyager |